Dental lathe

A dental lathe is a type of machine that is used to shape and polish dental restorations such as crowns, bridges, and dentures. It is typically made of metal and is powered by electricity. To shape and polish the restoration, the lathe employs a rotating tool known as a bur. As the bur rotates, it is held in a chuck and pressed against the restoration. To keep a dental lathe in good working order, the moving parts must be cleaned and lubricated on a regular basis.

Porcelain furnace

A porcelain furnace is a device used in dental laboratories to fuse porcelain to metal restorations. It is heated using electricity and can reach temperatures up to 900 degrees Celsius. The restoration is placed in a chamber of the furnace, and the porcelain is fused to the metal by heating it to a high temperature. Regular cleaning and calibration of a porcelain furnace are required to ensure accurate temperature control and to extend the equipment’s lifespan.

Vacuum former

A vacuum former is a device used to create dental devices such as retainers, mouthguards, and orthodontic appliances. It is used to heat a thermoplastic sheet and then form it over a mold. The vacuum pulls the heated plastic into the mold, creating a custom-fit device. To maintain a vacuum former, regular cleaning of the heating element and the mold is important to ensure accurate and consistent results.

Articulator

An articulator is a device used in dental laboratories to simulate the movement of a patient’s jaw. It consists of two metal plates that are attached to each other, and a hinge that allows the plates to move in the same way as a patient’s jaw. An articulator is used by dentists to ensure the accuracy of dental restorations such as dentures or partial dentures. To keep an articulator in good working order, the hinge must be cleaned and lubricated on a regular basis.

Wax carving instruments

Wax carving instruments are tools used in dental laboratories to shape wax used for creating models of dental restorations. They come in various shapes and sizes, including knives, spatulas, and chisels. They are made of stainless steel and are used to shape and sculpt the wax. Regular cleaning and sterilization of wax carving instruments is necessary to keep them clean and ready for use.

Dental plaster mixer

A dental plaster mixer is a device used to mix dental plaster and water to create a material that can be used to make molds of teeth. It is typically a small, hand-held device that is powered by electricity. To keep a dental plaster mixer in good working order, the moving parts must be cleaned and lubricated on a regular basis.

Dental casting machine

A dental casting machine is a device used to cast metal restorations such as crowns, bridges, and inlays. It typically consists of a crucible where the metal is melted, and a casting ring where the metal is poured into a mold. Electricity is typically used to power the casting machine, which can reach high temperatures. Regular cleaning and calibration of a dental casting machine are required to ensure accurate temperature control and to extend the equipment’s lifespan.

Dental drill

A dental drill is a hand-held device used to prepare teeth for restorations such as fillings or crowns. It is powered by electricity and uses a rotating bur to remove tooth structure. To maintain a dental drill, regular cleaning and sterilization of the bur is important to ensure it continues to work properly.

Dental polisher

A dental polisher is a hand-held device used to smooth and polish dental restorations such as fillings, crowns, and bridges. It typically uses a rotating wheel or brush that is coated with a polishing paste. The polisher is electrically powered and can be used to produce a high shine on dental restorations. To keep a dental polisher in good working order, the wheel or brush should be cleaned and sterilized on a regular basis.

Dental microscope

A dental microscope is a microscope that is specifically designed for use in dentistry. Dentists and dental laboratory technicians use it to thoroughly examine teeth and dental restorations. It has a built-in light source to illuminate the area being viewed and can magnify up to 25x. Regular cleaning of the lens and body of a dental microscope is necessary to ensure that the image remains clear.

Dental curing light

A dental curing light is a device used to harden dental resins used for fillings, crowns, and other dental restorations. It typically emits light in the visible and ultraviolet range. Regular cleaning and calibration of a dental curing light is required to ensure accurate curing of dental resins.

Dental scanner

A dental scanner is a device used to create digital models of teeth and dental restorations. It uses lasers or white light to capture detailed images of the teeth, which are then used to create a 3D model that can be used to create custom dental restorations. To maintain a dental scanner, regular cleaning of the scanner and calibration of the laser is important to ensure accurate scanning results.

Dental sintering furnace

A dental sintering furnace is a device used to sinter dental restorations made of zirconia. It is used to heat the zirconia to a high temperature which makes it hard and strong, similar to natural teeth. Regular cleaning and calibration of a dental sintering furnace is required to ensure accurate temperature control and the equipment’s longevity.

Dental milling machine

A dental milling machine is a device used to create custom dental restorations such as crowns, bridges, and inlays. It uses computer-aided design (CAD) software to create a virtual model of the restoration, which is then milled out of a block of dental material using a rotating cutting tool. To ensure accurate milling results, a dental milling machine must be cleaned and calibrated on a regular basis.

Dental alloy furnace

A dental alloy furnace is a device used to melt and cast dental alloys such as gold and silver. It typically consists of a crucible where the alloy is melted, and a casting ring where the alloy is poured into a mold. The furnace is usually powered by electricity and has the ability to reach high temperatures. Regular cleaning and calibration of a dental alloy furnace are required to ensure accurate temperature control and the equipment’s longevity.